AVAILABLE NOW

1970 Electric Land Rover Series 2a. Yours to finish.

Our most complete build yet — rebuilt from the ground up on our award-winning electric platform. Just waiting on your choice of colour and interior.

Normally a Jaunt takes twelve months. This one’s ready in three.

Every part of the engineering is finished. The chassis has been completely rebuilt with custom EV mounting points. New axles, disc brakes on all four corners, a rebuilt Tesla motor, 55 kWh battery pack, DC fast charging — the entire award-winning Jaunt platform, assembled and tested.

All the components for final assembly are here. Choose a paint colour. Choose an interior. We’ll have it finished and on the road from three months. It’s the only way to skip the queue for a Jaunt electric Land Rover.

White electric Land Rover Series 2a — full side profile in studio

Walk around this vehicle and understand the specs.

A complete vehicle, not a conversion project

This is a finished, engineered car built on the platform that won an Australian Good Design Gold Award, was a finalist in the Victorian Premier’s Design Awards, and was named one of AFR’s twelve best cars of the year.

The short-wheelbase 88” hardtop is compact, practical, and legally seats five — three across the front bench (with a fully flat floor now the transmission tunnel is gone) and two in the rear.

Australian Good Design Gold Award Winner

Original Vehicle

1970 Land Rover Series 2a 88" Station Wagon

Body Style

Hardtop with alpine & sliding rear windows. Cat-flap tailgate with gas strut assist.

Seating

5 legal seats — 3 front (flat floor), 2 rear inward-facing

Motor

Rebuilt Tesla Model 3 motor, fully automatic (PRND), two drive modes

Battery

55 kWh, 400V. New LG Chem modules. 3-year warranty

AC Charging

6.6 kW on-board charger

DC Fast Charging

70 kW CCS2

V2L Output

3.3 kW 240V

Brakes

4-wheel disc. Electric brake booster. Electric park brake.

Driveline

All-new axles, differentials, driveshafts. CV front axle for constant 4WD. 3.5:1 diff ratio.

Chassis

Complete rebuild with custom EV mounting. FEA-simulated for impact and fatigue.

Electrics

Complete new 12V loom with programmable power distribution module.

Quilted leather and tweed front seats in a Jaunt electric Land Rover

Over 1,000 hours of work. Already done.

Every bolt, every panel, every weld. Completely rebuilt chassis, new axles, disc brakes, custom hardtop with safari windows, all-new electronics. The photos below show what’s been built — this is where the time and craftsmanship lives.

Isometric blueprint showing all EV components in a Jaunt electric Land Rover Series conversion
Technician assembling a Jaunt electric Land Rover chassis in the workshop
Chassis with Tesla motor mounted, overhead view
Inside the body shell showing the battery bay during build
3D CAD model showing FEA stress simulation of the Jaunt chassis
New front and rear axle assemblies with disc brakes on wooden crate
Technician fitting body panels during the Series 2a build
Stripped and primed aluminium body shell in the Jaunt workshop
Hand-sanding body panel during paint preparation
Interior showing new flat floor panels with transmission tunnel removed
Bare body shell from rear showing custom hardtop construction
Technician fitting windscreen frame with safari windows
Fitting insulation panel inside the custom hardtop roof
Panel stripe detail with metalworking tools during body fabrication
Jaunt dashboard with original style gauges and digital display
ELECTRIC badge and CCS2 charge port on blue Series 2a
Rear view of the green Series 2a at golden hour with tailgate open

Make it yours

The hard work is done. Now the fun part — choose how this vehicle looks and feels. Land Rovers are an incredible blank canvas. Heritage greens, the right white, a bold multi-colour patchwork, or something inspired by an enamelled cast iron pot. We’ve done them all.

Exterior colour

Any colour you can dream up. Heritage Land Rover shades, modern colours, two-tone, matte, gloss — even full custom palettes designed with an artist. We’ll work with you to get it right.

Interior & trim

Carpet matting in a range of colours. Custom door cards. Seat upholstery from hardwearing canvas to leather. Choose what suits your life — weekend adventure or daily driver.

Wheels & tyres

Trail terrain for extra range and a quieter ride. All-terrain for tougher construction and more grip. Or a mud terrain on an EV — there’s nothing wrong with that.

Decals & details

Subtle matte graphics, heritage-inspired lettering, or clean and unmarked. These small choices make a Jaunt feel like yours.

Colour inspiration

Heritage green electric Land Rover Series 2a at harbour

Heritage Green

White electric Land Rover Series 2a studio profile

White

Patchwork multi-colour electric Land Rover Series 2a

Patchwork

Tonga green electric Land Rover Series 2a rear view at golden hour

Bahama Gold

Interior inspiration

Custom carpet with leather edging and Jaunt sill plate

Carpet

Custom door card with patterned fabric insert and wood grab handle

Door Cards

Quilted leather and tweed front seats in a Jaunt electric Land Rover

Seats

Complete Jaunt dashboard with custom gauges, PRND selector and digital display

Completed Interior

Skip the twelve-month wait. Drive a Jaunt in three months.

Complete vehicle from AUD $299,000

Final price depends on your choice of paint, interior, wheels, and options.

Enquire About This Vehicle

This is a single, ready-to-finish vehicle. Delivery from three months depending on your paint, interior, and options. Once commissioned, the next available build slot is twelve months away.